ZX-UNO 2M VGA Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for ZX-UNO 2M VGA Retro 8bit Computer. Can print multi color or single color. use 4 x M3 Hex Screws 10mm or…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for ZX-UNO 2M VGA Retro 8bit Computer.
Can print multi color or single color.
use 4 x M3 Hex Screws 10mm or longer
I have used a 3.5mm DC jack instead of 5.5mm DC jack
(3.5mm is safer for 5V, as all my 5.5mm are 12V or 24V DC)
I have made top case versions for both 3.5mm and 5.5mm DC jacks as well as for optional On/Off Switch. Bottom case has engraved labels.
If printing single color use two of the "ZX-UNO-2M-VGA_Bottom_LED_Single_White" to insert into the case for LED indicators, or you can print bottom white case version and LED's can shine through the case.
Dual color you need to merge a bottom with ZX-UNO-2M-VGA Bottom LED Angled White or ZX-UNO-2M-VGA Bottom LED Flat White Flat. (not sure which will be best for light transfer)
Like wise top cover can be printed multi color or just single color with logo engraved.
On/Off Switch is 15x11mm KCD1-11 3A 250V AC mounted next to DC 5V
Updated: added Full Logo version where logo is full thickness of top. Logo designed to be printed white with opaque case so logo can be back lit with LED.
XZ-UNO is created by
http://zxuno.speccy.org/ https://github.com/ManuFerHi/ZXUNO_VGA_2M
Print Settings
Printer:
Geeetech E3D V6
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Generic PLA / PETG black & white
Notes:
print with brim to stop corners lifting.
4 walls
6 bottom layers
0 top layers
1 wall for logo
1% infill Octet (turn off infill but still allow correct wall infill, 0% infill causes issues.)
Category: Computer