Yamaha HW3 Crosstown hi-hat stand angle brackets adapter for double bass pedal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angle adapters for the hi-hat stand of the lightweight Yamaha HW3 Crosstown hardware kit, which is originally static and
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Angle adapters for the hi-hat stand of the lightweight Yamaha HW3 Crosstown hardware kit, which is originally static and doesn't allow rotating the pedal to accommodate a double bass pedal. These adapters fit in place of the hi-hat pedal's retention rods, which can then be inserted at an angle into the adapters.
Multiple pedal angles provided: -32° (most rotated), -24° and -16° (least rotated). Mirrored set of adapters (+32°, +24°, +16°) are also included for right-side hi-hat placements.
Retention anchors and pins are also provided for securing the adapter to the hi-hat base.
Files needed for printing e.g a -24° setup:
- 1x left adapter -24deg
- 1x right adapter -24deg
- 2x anchor
- 2x pin
Note that while these have been tested to print fine “as is” on a MINI with Prusament PLA, some settings tweaking (for the overhangs) and post-processing might still be required on other setups.
While it is theoretically possible to have an even more extreme angle of rotation, the 32° angle has been determined to be the highest before the stand's legs become an obstacle. Likewise, the 16° angle is the lowest significant one, that still allows to place another pedal next to the hi-hat pedal.