1 / 2
Yamaha HW3 Crosstown hi-hat stand angle brackets adapter for double bass pedal — zdjęcie 1
1 / 2

Yamaha HW3 Crosstown hi-hat stand angle brackets adapter for double bass pedal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Angle adapters for the hi-hat stand of the lightweight Yamaha HW3 Crosstown hardware kit, which is originally static and

Ocena
0 / 5
Polubienia
5
Pobrania
33
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Public Domain

Angle adapters for the hi-hat stand of the lightweight Yamaha HW3 Crosstown hardware kit, which is originally static and doesn't allow rotating the pedal to accommodate a double bass pedal. These adapters fit in place of the hi-hat pedal's retention rods, which can then be inserted at an angle into the adapters.

Multiple pedal angles provided: -32° (most rotated), -24° and -16° (least rotated). Mirrored set of adapters (+32°, +24°, +16°) are also included for right-side hi-hat placements.

Retention anchors and pins are also provided for securing the adapter to the hi-hat base.

Files needed for printing e.g a -24° setup:

  • 1x left adapter -24deg
  • 1x right adapter -24deg
  • 2x anchor
  • 2x pin

Note that while these have been tested to print fine “as is” on a MINI with Prusament PLA, some settings tweaking (for the overhangs) and post-processing might still be required on other setups.

While it is theoretically possible to have an even more extreme angle of rotation, the 32° angle has been determined to be the highest before the stand's legs become an obstacle. Likewise, the 16° angle is the lowest significant one, that still allows to place another pedal next to the hi-hat pedal.

Tagi