1 / 4
Flower pot holder for window sills (Customizable)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flower pot holder for sloping windowsills. Straight flowers at last!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- measure the bottom of the flower pot -> for example 117mm
- download a protractor app on your cell phone
(e.g. Android: https://play.google.com/store/apps/details?id=org.nixgame.bubblelevel) or measure the angle of your windowsill in another way -> for example 5.2 degrees
The model variant 120mmx5deg.3mf is suitable for this flower pot and window sill angle
Print Settings
- 0.2 Layerheight
- no Brim
- no Support
- 3 Walls
- 20% Infill
- Print as shown in the picture below
Costumize with Autodesk Fusion 360 (or simular)
I use some parameters for dynamically changing the model.
- A: Outer-Diameter - Diameter of the flowerpot at the base
- B: Angle - Angle of the Fensterbank
- C: Offset - Additional height
- D: Support Area for the flowerpot
- E: Bottom Thickness
- F: Wall Thickness
- G: Number of slots in the bottom.
Hinweis: Für ≥ = 120 mm werden 64 Schlitze empfohlen; Für ≤=110mm werden 32 Schlitze empfohlen. Dies muss in der Historie manuell angepasst werden, indem das Kreismuster unterdrückt oder die Unterdrückung aufgehoben wird.
