Test of dimensional accuracy of cylinders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple test for checking how much difference in diameters you should put on your models that need cylinders and holes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- GNU General Public License v3.0
When designing things to be manufactured, tolerances (how much the real part can deviate from the drawing) are important to ensure everything works and everyone who tried making mechanical systems with 3d printer probably already knows that the printer is 100% going to deviate from the model (can't make a hole 10mm and a pin 10mm and expect them to fit together nicely), so you have to figure out what difference on the measures you need for everything to work.
To simplify the task, I've made 7 models to test difference deviations (using max and mins from ISO 286) to test what difference in diameters gives what fit. Here's the data:
- 14mm bushing: a bushing with exactly 14mm of internal diameter. Test the pins against this.
- a11 max pin: 0.4mm smaller (Marked a11M)
- a11 min pin: 0.29mm smaller
- b11 max pin: 0.26mm smaller (Marked b11M)
- b11 min pin: 0.15mm smaller
- c11 max pin: 0.205mm smaller (Marked c11M)
- c11 min pin: 0.095mm smaller
Here're the tables I pulled the values from:
- A (a) Tolerances For Shafts and Holes - Full Charts (machiningdoctor.com)
- B (b) Tolerances For Shafts and Holes - Full Charts (machiningdoctor.com)
- C (c) Tolerances For Shafts and Holes - Full Charts (machiningdoctor.com)
Testing procedure:
Print the bushing, the print go printing pins (you can also print them all in one go, but I would recommend you use sequential printing enabled for that instead of having the printer do it all at once) and check how they fit with the bushing. This is meant to give you a fast way to check how much larger/smaller you need your parts to be to achieve the fit/clearance/spinning that you need on the profile and material you're using as well as how much you would need to sand if the surface finish is important.
