Indesit fridge freezer drawer door catch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for those small catches on the freezer doors which break off easily. I used some strong narrow double…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- BSD License
A replacement for those small catches on the freezer doors which break off easily.
I used some strong narrow double sided sticky tape (the foamy TESA brand with yellow protective film works well) on the back of the print to firmly attach it to the door. It wants to come out if you don't so this.
Thingiverse
https://thingiverse.com/thing:6563185
GitHub
https://github.com/nomike/indesit-fridge-freezer-drawer-door-catch-thingy
Instructions
I printed it with 4 perimeters and 50% infill in PETG. Be aware that PLA might not like the environmental conditions in your freezer, but I haven't tested this.
Category: Other