1 / 4
mudguards 16" bicycle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mudguards fo 16" bicycle tires like woom
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 48
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I printed these mudguards over a year ago and they held up nicely so far.
You will obviously need some more small parts like screws and washers. I used some old spokes of a 28 inch bike as the radial side supports. I also used zipties to fixate both parts from the back together.
Printing
- Use the step files - there are significantly less visible discretisations on the print. especially visible with shiny filaments.
- Fits on a 256x256 mm build plate - split to objects/parts in the slicer and then arrange the parts until it fits on the buildplate
- Print on its side
- The color changes in the picture are 5mm from top/ bottom away
- Tree supports might be sufficient
Remix
- With provided step file
- Or from here in onshape