Stevenson screen (weather shield) for Xiaomi Mijia / Qingping sensors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact and sturdy Stevenson screen for the popular Xiaomi Mijia BLE LYWSDCGQ and Qingping CGDK2 thermo / hygrometer.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 96
- Makes
- 1
- Views
- 1,116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Stevenson screens protect ambient sensors from direct sunlight and rain, ensuring constant airflow (based on temperature differential) to provide accurate readings. Due to how they are built, you will not be able to see the screen of your thermometer — that ought to be fine under the assumption that you mainly use the thermometer to e.g. feed climate data remotely to your Home Assistant instance.
Attention! A new, more advanced and easier to use Stevenson screen is available! The new version is compatible with more instruments and much easier to do maintenance such as battery changes.
You can print this with ABS, or use ASA for outdoor durability. Avoid materials that suffer under ultraviolet light exposure.
This Stevenson screen thermometer holder is divided in three parts:
- The enclosure itself — a stack of cones with fins, providing for vertical airflow while affording solar / rain protection to the thermometer. This should be an interference fit with the arm, but you are advised to glue them together. To add your thermometer, insert the thermometer from below, rotate it 90 degrees, and fit it in its designated inner space, making sure the air intake of the thermometer is not covered up; it should be a snug fit when printed with 0.20 mm layer height and a 0.4 mm nozzle.
- A ~24 cm arm to space the enclosure apart from walls (the arm sports a snap-fit clamp for a balcony handle 50.5mm x 30.5mm thick — you can change the sketch for the arm in the included FreeCAD model, in order to make the model better comply with your fitment and positioning needs). Print sideways to avoid supports. Once you have made certain that the arm is adequate for your thermometer's final mounting location, glue the arm to the enclosure using epoxy or other ABS-compatible glue.
- A roof to protect from sunlight or rain directly above, designed to let rising hot air escape out through the top. Print upside down without supports. Glue this with epoxy or other ABS-compatible glue; apply glue to the roof lip (its underside), then place centered atop the topmost fins of the enclosure, and apply moderate weight while the glue cures. You might also have success fusing the parts with acetone.
The internal thermometer / hygrometer tray is merely a carve-out, cylindrical in shape, that matches the dimensions of the thermometer / hygrometer (plus a small tolerance for FDM shrinkage). You can in principle fit any device you want, by simply changing the object subtracted from the internal tray from a cylinder to any shape you want. For extra compatibility, the FreeCAD model has two thermometer cutouts you can use to model the thermometer base properly:
- Xiaomi Mijia (thicker).
- Qingping CGDK2 (thinner).
To generate an STL of the housing with base that fits one of the two, select the Cut within Holder box minus thermometer shape and change the tool to be either Xiaomi Mijia or Qingping CGDK2. You can then export the Housing with base to an STL, and print that.
This fine gentleman's model has solid tips on how to maximize the accuracy of your sensor by wisely choosing the mounting placement of the screen. Long story short, the mounting arm may need to be lengthened if you're mounting on a side wall of your home, or you may prefer to use a long arm made of another material, such as in this make.