Aurora Lily58 Choc low profile case Version 2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.53 net (excluding VAT)
For file: Lily58 MCU Cover left and right 5mm bumper_0.4n_0.2mm_PLA_MINIIS_23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 22.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Aurora Lily58 Choc low profile case Version 2
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 184
- Makes
- 1
- Views
- 1,480
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was in need of a second Lily58 low profile keyboard so I order a new PCB kit but to my surprise this time it did not fit my old case. So I adjusted it to fit it flawless. with this new version the Keyboard is 0.4mm lower as the previous version!
This time I share the steps files and the keygrid dxf file too, maybe this helps someone to adjust it to his liking.
Changes:
- added spacers to the bottom plate that the PCB is more stable
- re done the keygrid that the Choc V1 switch now clip proper in
- add spacers to the keygrid that it sandwiches the base PCB between the keygrid and the bottom.
PCB Hardware that I used Aurora Lily58 PCB Kit from splitkb.com with:
- RGB Underglow,
- RGB Backlight
- Choc Hotswap sockets
Microcontroller:
Case hardware Aurora Lily58 Low Profile Case from splitkb.com:
- Aurora Low Profile Case Hardware Kit here only 10 x M2x6mm spacers
- 20 x M2x4mm screws for top and bottom
- 4 x M2x8mm screws with hex nuts for the MCU cover
As switches I used Kailh Low Profile Choc Switches V1 Red
As key caps I used costume MBK key caps from https://fkcaps.com/
As I didn't like the QMK only pre-compiled firmware from splitkb.com which made on the fly key-map changes hard I created a VILA keymap / firmware for it which you can find on my github https://github.com/Gabbajoe/vial-qmk/tree/splitkb_lily58 in the folder keyboards/splitkb/aurora/lily58/keymaps/vial or vial-liatris where I disabled the power led of the microcontroller.
In VIAL I enabled all features.
As I learned from my MX Key build the OLed screens did not offer any added value to me so I did not use them. As MCU Cover I remixed the Lily58 MCU Cover from @sungo I added a 5mm spacer that sit flush on the PCB so that I do not need to use the standoffs from the Hardware kit which makes the Covers more stable.
As you can see on the pictures I printed the bottom part with a clear filament and the boarders in black.
I used PLA filament this time