Grocery Bag Handle Grip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.89 – €2.31 net (excluding VAT)
For file: grocery.bag.handle.grip [0.4n-0.30-015-PETG-36g-1h47m].gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.10 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 1.79 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A comfortable compact grip for carrying reusable (or one-use) grocery bags.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 182
- Makes
- 2
- Views
- 866
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Project
A comfortable compact grip for carrying reusable (or one-use) grocery bags. Grip easily fits in pockets or can reside on one handle while the other slips in and out of the grip when needed.
Printing
Prints vertical on either end with minimal supports or no supports at all if printer bed has good adhesion. To save time, the grip can be printed at a layer height of 0.30 mm DRAFT. Set perimeter to 4 and fill pattern to gyroid for added strength.
Print Time (Approximate)
Grocery Bag Handle Grip
(0.4 mm Nozzle, 0.30 mm layer height, 15% Infill, 35g): 1 hour 46 minutes.
Printer Settings
PrusaSlicer: Version 2.7.4
Printer: Prusa MK3S
Material Used: PLA Mixed
Temp (Nozzle): 210
Temp (Bed): 60
Nozzle: 0.4 mm
Layer height: 0.30 mm DRAFT
Supports: Yes
Fill Density: 15%
Layers and Perimeters -> Vertical Shells
Perimeters: 4
Infill
Fill Pattern: Gyroid
Files
grocery.bag.handle.grip.stl
Usage
Thread one handle all the way to position 2 and leave there if desired. If threading proves difficult, slide the grip along the handle while working it into position. When ready to use, thread the other handle into position 1.
Durability
Prototypes of this model have been in use for four years and have performed well under normal wear and tear without breaking. Reusable grocery bags that have thick handles might be difficult to thread into the grip.
Disclaimer
PLA grip tested holding a reusable grocery bag with 27 kg (~60 lbs) of weight. Maximum carrying weight unknown so use with caution when transporting extremely heavy bags.
Prints with poor layer adhesion may be susceptible to breakage and should not be used.
Scaling the grip up for larger hands has not been tested but should work, however scaling the grip down might reduce the overall strength of the print and is not recommended.