Foscam Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€16.77 – €20.49 net (excluding VAT)
For file: Foscam Mount_0.4n_0.2mm_PLA_MINI_18h47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.63 excluding VAT (range midpoint).
- Weight reported by the author
- 230 g
- Print time reported by the author
- 18.78 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a mount for a Foscam R4S 4MP WiFi Home Security Camera.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount for a Foscam R4S 4MP WiFi Home Security Camera. This mount boosts the camera to get a wider field of view. This mount has holes to allow for easy access to all the features of the camera well the camera is in the mount.
Print Instructions
- Material: PLA or PETG
- Supports: Yes
- The lip of all the buttonholes will require supports because of the curved nature of the mount
- Orientation: Place the bottom on the build plate
Assembly
- Take the antenna off the camera
- Take the nut off of the bolt that the antenna attaches to
- Slide the camera into the mount with the protruding antenna mount matched up with the channel at the top of the camera mount
- Twist the camera into position
- Reattach the nut to the antenna bolt
- Reattach the antenna
- Plug in the power cable and the SD card
- Screw the mount in (the mount has four holes that will take screws with a 5 mm diameter head and a 2.5 mm diameter shaft) (optional)
If you enjoy this model, please leave a like and a comment. Please contact me if you have any questions, concerns, or problems.
If you want to support the creation of more models like this one, you can subscribe to my Printables Club (at https://www.printables.com/@Devise3D#join:451) or you can purchase an individual model on CGtraitor (at https://www.cgtrader.com/devise3d).