TwoTrees Sapphire Plus Hood Pillars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will allow you to enclose the top of your printer.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
This is a simple system I put together to simply add a hood to your Sapphire printer. You will need to print 4. I suggest you create a modifier box on the bottom high enough to go over the screw base. I included pics.
Material: ASA or ABS recommended, but PETG or PLA will work.
Infill: 30-40% overall, 70-100% for the bottom modifier.
Once you print them you will need to get a longer screw to screw them in. The depth of the hole is 8mm. So you will need to get a 8-10mm longer screw.
Once mounted you can measure what you need for Plexiglass. A standard 3mm (1/8 in) acrylic sheet will fit in the slots.