1 / 3
Sprührohr/ spray tube (for WD40) — image 1
1 / 3

Sprührohr/ spray tube (for WD40)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.23 – €0.28 net (excluding VAT)

For file: WD 40 Spruhrohr_0.4n_0.1mm_PETG_MK3.5_19m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.26 excluding VAT (range midpoint).

Weight reported by the author
2 g
Print time reported by the author
19.2 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Sprührohr/ spray tube (for WD40)

Rating
4.818 / 5
Likes
451
Downloads
1,620
Makes
17
Views
4,182
Reviews
11

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Da ich das Sprührohr meiner WD40-Dose verlegt habe, musste schnell ein neues her. Vorhandene Modelle habe ich ausprobiert, aber sie haben leider nicht gepasst.

Das Sprührohr ist ca. 80mm lang und hat einen Innendurchmesser von 1,5mm, der Aufsteckdurchmesser beträgt 3,2mm (schrumpft etwas). Damit passt es perfekt, denn das Rohr an der Dose hat einen Durchmesser von 3,15mm.

 

Translation: DeepL

As I had misplaced the spray tube of my WD40 can, I had to find a new one quickly. I tried existing models, but unfortunately they didn't fit.

The spray tube is approx. 80mm long and has an internal diameter of 1.5mm, the push-on diameter is 3.2mm (shrinks slightly). So it fits perfectly, because the tube on the can has a diameter of 3.15mm.

Tags