7,820 models
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…
Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…
I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…
Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…
I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
K1 cable chain clip to allow placement of the bowden tube on top of the cable chain. If your have extrusion issues this may help with the addition of a lid riser. Updated: As requested I have created a side mounted clip. Please don't…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…
New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…
Made this clip for the K1 Max, from my original clip for the K1, it now is more compact, with rounded corners on top and tighter tolerances to fit snug. Have also included a newer slim model. I found that the original bowden tube clips,…
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Use your standard bits in this simple screwdriver. Update I added a folder with STLs that support different sizes of magnets. The original version is still without a magnet, which works well in my case as the tolerances are low enough to…
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
The Dewdrop Jewelry Tray brings elegance and functionality together in a beautifully minimal design. Inspired by the organic shape of a dewdrop, this tray features two smooth, curved sections, making it perfect for organizing rings,…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…
Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…
Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
Screwdriver organizers that are compatible with Gridfinity. You will probably want to print 2 ends, and then how ever many middle pieces to organize your screwdrivers. Inspired by…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…
I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain). I suppose that it should fit on the K1 Max cablechain…
For assembly there are some M3 bolts in different lengths needed and I used 0.3mm nozzle cleaning needles. The holes for the bolts also need to be drilled to the right size and the needle sleeves have to be drilled for the needles you have.
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…
Update 3-Apr-24: Added files for different size magnets from various requests. Introducing v2 of the popular Pocket Screwdriver Kit ! Holds straight ¼" / 6mm bits, up to ~ 1" / 25mm in length. This version was re-built from scratch to…
V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…
Holder for screwdriver (set bought at Gamma)
Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.
Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…
This is a simple 75mm spray nozzle extension für WD40 or other aerosols ;) different shaft-diameters added (2,8mm / 3,0mm / 3,2mm / 3,4mm / 3,6mm) to fit more aerosol-cans (for WD40 3,0mm-version should fit)
This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…
FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
This is a Gridfinity -compatible screwdriver bit holder for the bit-sets sold by Linus Tech Tips. One of these (1x1x25) blocks will hold exactly one set of 12 bits. They are stackable when empty. LTT's bits are slightly shorter than…
This is my take on a WDT Tool for distribution of espresso grounds after grinding. Requires 5 0.4mm stainless steel nozzle cleaning tools. I printed the two parts of the tool together at 0.2 with adaptive layers turned on, and the threads…
So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…
its that thing p.s. to prevent people from being upset - i've no idea if it fits e3d v6 or not. naturally the printed version is not as good as the real thing, but works as a temp solution while you are waiting for a pack of 50 of them…
This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
This Screwdriver Holder is more space effective since you can just push or pull the screwdriver right in or out. Fits most screwdrivers and they sit tight and doesn't wiggle. To attach it to the HSW you need the empty inserts*. There are…
Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.
Da ich das Sprührohr meiner WD40-Dose verlegt habe, musste schnell ein neues her. Vorhandene Modelle habe ich ausprobiert, aber sie haben leider nicht gepasst. Das Sprührohr ist ca. 80mm lang und hat einen Innendurchmesser von 1,5mm, der…
Description: Cup to dispense washing powder / detergent. Has a ml scale on the inside. I hope you like the model! → Makes and Comments are very much appreciated :) Two V ersions Available: → New version (v6): Fully support-free design –…
Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…
My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .
I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…
It's my turn again. I wanted to design a reversible ratchet that worked without moving an axle. I wanted it to be as small as possible and I wanted to keep the aesthetic of my first screwdriver keychain . This is what I've got. It's 50 mm…
Height: 1.5 mm. It is possible to print in resin or FDM
hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
This is a crank driven manual (non electric) WDT tool. It helps get rid of clumps in your coffee basket and evenly distribute coffee before pulling a shot. 3D printing settings: My tool was printed with ABS+ @ 0.4 nozzle, .2 layer height.…
Some holders for screwdriver
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
What it is A tiny screwdriver, storing seven 4mm Micro Bits (28mm in length) and attachable to a keyring or string on your gear. → Be prepared for that single or few screws that casually pop up, trying to ruin your day. The forces induced…
Made this remix for ¾" french cleat Added a single and a dual color version (MMU) Print upside down!
I love the Honeycomb Storage wall. I was transitioning from my peg board and I couldn't find a holder for my screwdrivers that worked like I wanted, so I made one. Nothing fancy but it works like I wanted it to.
I needed a way to hang my new LTT Screwdriver on the Skadis pegboard that I have in my office. This just holds it vertically and it fits inside an angled hole that helps hold it vertical and keeps it from falling over. I've created a…
Improves the silicone rubber bushings that ship with the Space Pi Dryer and Space Pi (Plus). Designed to hold the end of the PTFE tubing in place, and prevent it from slipping inside the dryer. Does NOT work with the Space Pi X4. Internal…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
In version 3 The bit can be inserted up to halfway. In version 4 you can insert the bit all the way inside, so that greater torque can be applied before it fails. Version 5 has an upgraded hole for the bit, and also a place to add A small…
Designed to fit a Stanley changeable head screwdriver, your mileage may vary. Make sure to check the dimensions of your screwdriver against this model before printing! You can use TinkerCAD or some other quick modeling software. There's…
GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/580064 In this alternative version the screwdriver body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
