1 / 3
Multiboard cotton swab holders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiboard cotton swab/pad holders that uses MultiConnect connectors.
- Rating
- 0 / 5
- Likes
- 56
- Downloads
- 165
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Multiboard cotton swab holders in the following sizes: 100, 150, 175 and 200 mm.
The holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the cotton pad holder on these connection points.
Recommended print settings (same as multiboard defaults):
- 3 wall perimeters in wall thickness
- 15% infill
- No supports needed
- 0.2 mm layer height
- 0.40 mm nozzle
- PLA
Special thanks to Jonathan (KeepMaking) for creating multiboard and to David D for creating the flexible MultiConnect connectors.