Thule Tour Rack to GoPro adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.80 – €0.97 net (excluding VAT)
For file: Varia Thule GoPro v4_0.4n_0.2mm_PETG_MINIIS_47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 47.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I designed this adapter to fit on the Thule Tour Rack, instead of a reflector, and mount my Garmin Varia radar
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
My goal was to mount my Garmin Varia bike radar on my Thule Tour Rack (which I assume was designed to put a reflector).
Instead of designing a complex model, meant to compensate for angles (the Varia radar must be perfectly vertical), I decided to keep it simple by using a GoPro 3-prong mount instead as a stepping stone. Combined with the Garmin GoPro adapter model from @Brian it made it easy to adjust the angles perfectly, while also making my Thule adapter more universal as it also can be used to mount… well, a GoPro for example :)
I printed mine using Prusament ASA Saphire Blue so that it resists outdoor conditions well.
The holes on the bottom are tightly sized for Ruthex M5 threaded inserts and M5x10 screws. I recommend using some Loctite on these screws to avoid that they become loose with vibrations.
For the same reason, I used a Nyloc M5 nut and an M5x20 buttonhead screw on the GoPro prongs to secure the Garmin adapter.