PVC table mounts for schedule 40 2 inch PVC pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top (male, through table) mount and bottom stop mount
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 171
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a bracket made to help support 2" ID PVC pipe upright, as it passes through a work table.
I'm using this pipe for dust collection and to support power and watercooling for a CNC spindle.
The top bracket mounts to the top of the table to help provide horizontal support. The holes on the side can accept m5 bolts to help provide additional friction if needed.
The bottom bracket acts as a stop for the pipe and is sized to connect to a female PVC fitting. I used a ring of rubber above the bracket to reduce air leaking.
I printed both at 0.24mm layer height.
When printed, the bottom bracket has a single filled (0.24mm) layer inside the tube that can be cut away with a sharp knife, so that supports are not needed.
The piece of PVC I used fit snuggly, with my printers tolerances, so your mileage will vary. I recommend printing a small slice of the bracket to test the fit first.