Nozzle Brush for K1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable holder for a standard nozzle cleaning brush for the Creality K1/K1C (I don’t know about the max).
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 134
- Makes
- 1
- Views
- 1,029
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Requirements and warnings:
- Requires root to edit printer.cfg and gcode_macro
- not compatible with original start_print
- not compatible with Creality Print
- you can‘t start prints directly on the K1 display because when starting them from the display they have a different print start procedure that I haven‘t been able to change so far
- if a print is started with the wrong macro the nozzle will crash into the nozzle brush and may damage your printer
- I do NOT take any responsibility for any damage caused by improper usage of my design!
Description:
It's a new design inspired by this model:
https://www.printables.com/model/803777-creality-k1c-silicone-nozzle-cleaner-mod-easy-bed
I've used this model with the silicone brush before but it didn't last very long for me. So I made my own design using a standard nozzle brush that you can buy on Aliexpress.
There's an installation manual included.
Config files are in the ZIP.
Print instructions:
-Layer height: 0.2mm (doesn't really matter)
-Material: ABS/ASA (Something stiff that can withstand high temperatures)
-No supports
-May need to use brim