1 / 16
Printable Spool with visible Infill
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable spool, both sides are the same. In the center you can place a 10cm inner cardboard or plastic tube.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Printable spool, both sides are the same. In the center you can place a 10cm inner cardboard or plastic tube.
Optional 0 (zero) top and bottom, the infill will be visible. In this case the ideal is to use 30% or more of infill, or scale in Z.
Nozzle 0.6mm or bigger for stronger part.
V12 > 2 parts, a longer one of 35 or 60mm and another outside part with a thread to screw into the first longer part.
V11 > Thicker to give more resistance to torsion.
V10 > Initial model published.