Rounding scribe /Square root jig
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.61 – €4.41 net (excluding VAT)
For file: Sqrt-scribe v 0-1_0.4n_0.2mm_PLA_MK4IS_2h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.01 excluding VAT (range midpoint).
- Weight reported by the author
- 87 g
- Print time reported by the author
- 2.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Round wooden square stock up to 200mm wide.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
When rounding wooden square stock you usually go from a square to an octagonal. Measuring this can be hard, especially when there is a taper in the wood, as in mast making for boats, or round tapered legs for furniture. This jig is helpful with making pencil marks to which you can plane the wood. It's derived from basis Pythagoras math. As you can see in the drawing, this scribe allows you to make sure al the sides of the octagonal are of the same dimension.
The scribe works op to 200mm wide, pencil holes are 8mm wide and easily adjusted in the STEP file.