70mm Wobbler Lure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fishing lure for shallow to medium depth, slow sinking (if printed right), with amazing action
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 634
- Makes
- 2
- Views
- 2,455
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As featured in:
To assemble the lure you need:
- 5x 5mm stainless steel balls
- 3 twist wires using 0.8mm stainless steel wire
- 5mm eye
If you have a different size wire or screw eyes and they do not fit, send me a message and I'll upload a new version (communication is faster on Discord)
In the slicer (Bambu studio or Orca slicer) rotate the model to the following angles:
x: 234
z: 180
Go to support painting tool, set the highlight threshold to 80-83 degrees, enable on overhangs only, and using the fill tool fill the back side of the lure only
Print parameters:
Quality:
- Seam position: back
- Wall generator: Arachne
- Order of walls: inner/outer/inner
Strength:
- Walls: 3
- Infill density: 10%
- Infill pattern: Gyroid
Speed:
- Outer wall: 60
Support:
- Enable support: Enabled
- Type: normal(manual), this is equivalent to grid support
- Base pattern spacing: 1
- Independent support layer height: disabled
These settings are for PLA, if you are using ABS or any other material, adjust the walls and infill till you get to a point where the lure body is about 6-6.5 grams
Join my discord server for discussions related to 3d printed fishing projects: https://discord.gg/qmRwEuvpnC
If you want to support my work, consider joining my club or buy anything related to 3d printing using my affiliate links:
International: https://www.awin1.com/awclick.php?gid=404404&mid=21809&awinaffid=1565514&linkid=2790717&clickref=printables