1 / 2
Noctua Airflow Amplifier for DOSHISHA desk top fan — image 1
1 / 2

Noctua Airflow Amplifier for DOSHISHA desk top fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a Noctua airflow amplifier customized for DOSHISHA desktop fan. It is fixed in place with two clips. No screws.

Rating
0 / 5
Likes
4
Downloads
18
Makes
0
Views
609
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial — Share Alike

The original duct is meant to connect to Noctua, but I wanted to connect it to my fan.
I designed two clips. And made sure the duct didn't cover the switch.
I aimed for a model that was 25mm thick.

Printing the duct takes time, so I recommend printing it separately from the clip.
When printing the clip, I recommend 3Wall or more.
No support settings are required.
PLA is a sufficient material.
I recommend a width setting of 0.6mm. (@0.4mm nozzle)

*In reality, installing a duct doesn't change the amount of airflow that much.

ドウシシャのデスクトップファンにNoctuaのダクトを付けてみたくてクリップ式を考えました。実際のところ効果は微妙かもです。

FSW-106U用(22mm厚)もあるけど必要?

ドウシシャ(DOSHISHA) FSY-108U

https://amzn.to/3XpFP2Y

Tags