1 / 4
Skadis Self-Watering Planter Pot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small pot to put inside a Skadis tin, but with a self-watering design.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 108
- Makes
- 2
- Views
- 1,102
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a self-watering planter designed to fit inside the Ikea Skadis tin with a reservoir and capillary mechanism inspired by the Utilitarian Planter by @jack_hmr. Thanks to @Unknownkwita for the starting model.
Cutaway view of internals in fourth photo. Add water in the rear slit.
As with any model that's intended to be waterproof, print with extra perimeters, check your seam locations to make sure they're staggered, and bump up your filament extrusion multiplier a few percent. .3mf file with all print settings is attached.