Skadis Self-Watering Planter Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small pot to put inside a Skadis tin, but with a self-watering design.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 1092
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a self-watering planter designed to fit inside the Ikea Skadis tin with a reservoir and capillary mechanism inspired by the Utilitarian Planter by @jack_hmr. Thanks to @Unknownkwita for the starting model.
Cutaway view of internals in fourth photo. Add water in the rear slit.
As with any model that's intended to be waterproof, print with extra perimeters, check your seam locations to make sure they're staggered, and bump up your filament extrusion multiplier a few percent. .3mf file with all print settings is attached.