1 / 4
Customizable Katz-Moses Stop Block Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable spacer for the Katz-Moses stop block with a preset for the Kreg Heavy Duty Trak.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 35
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a parametric spacer for the Katz-Moses stop block. My track (Kreg Heavy Duty Trak) is 2.675" tall, leaving a gap slightly under ½" between the bottom edge of the stop block and my table. Pieces around ½" or slimmer don't have a good reference and often slide under the block. Adjusting the block is not possible since it is adjusted in increments of ½".
This spacer allows for use of the original screws and can be adjusted to any height for your fence by using the SCAD customizer.
