Festool Cleantec D27 to Dewalt Atomic Circular - DCS571
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 63
- Makes
- 0
- Views
- 506
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file is included, with my own ground-up Festool D27 Adapter end and an Atomic adapter end; bodies are separate if you want to modify for your own vac. The Festool end is an improvement over the one currently on Thingiverse, with thinner walls and a simpler fusion file. This was explicitly designed to be very easily printed on fast settings in PETG.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
20
Filament: Prusament PETG
Neon Green
Notes:
Printed with a 0.4mm nozzle in DRAFT mode to prove that the model could be printed sub 2hrs. It's a shop vac adapter; it's functional, not a work of art. It should be able to print fast so you can get to work and move on with your day. It should also work with a 0.6mm or 0.8mm nozzle and finish in around ~1hr 30min.
Category: Tools