Festool Cleantec D27 to Dewalt Atomic Circular - DCS571
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file is included, with my own ground-up Festool D27 Adapter end and an Atomic adapter end; bodies are separate if you want to modify for your own vac. The Festool end is an improvement over the one currently on Thingiverse, with thinner walls and a simpler fusion file. This was explicitly designed to be very easily printed on fast settings in PETG.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
20
Filament: Prusament PETG
Neon Green
Notes:
Printed with a 0.4mm nozzle in DRAFT mode to prove that the model could be printed sub 2hrs. It's a shop vac adapter; it's functional, not a work of art. It should be able to print fast so you can get to work and move on with your day. It should also work with a 0.6mm or 0.8mm nozzle and finish in around ~1hr 30min.
Category: Tools