VPC Virpil Center Mount for Obutto Revolution
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter mount to hardmount a Virpil/VPC joystick base to the low center position of an Obutto revolution…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter mount to hardmount a Virpil/VPC joystick base to the low center position of an Obutto revolution cockpit frame.
All you need is 2x M8 screws, 70mm in length or longer, you can re-use the washers and lock nuts that come with the pit.
For the bottom mount, remove the hex bolts from the stick base and replace them with longer ones (i used M4x30) when bolting the mount to the base. I also kept the metal lid of the base in place and sandwhiched it in between the base's body and the adapter.
Print Settings
Supports:
Yes
Resolution:
0.2mm
Infill:
20% upwards
Filament: Your choice the stiffer, the better Also your choice
Notes:
Just print laying flat on the biggest surface and add supports for the big bolt holes to keep them properly round in case your printer has bad part cooling or struggles with overhangs.
Category: Video Games