SIMPLY BOX - PRINT IN PLACE
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.69 – €2.06 net (excluding VAT)
For file: box_0.4n_0.2mm_PLA_MINIIS_1h36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.88 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Semplice box print in place già assemblata.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Si tratta di una box per conservare oggetti vari. Non necessita di supporti ed è già assemblata. Potete scalarla a piacimento dallo slicer!
Per aprirla è necessario fare una leggerissima pressione al centro sotto la maniglia. E' un effetto voluto per evitare un'apertura involontaria.
- Dimensioni: 60mmx40mmx40mm.
- Nessun supporto necessario
- Già assemblata
- Il file bgcode in descrizione è stato impostato con il PLA PRUSAMENT
ENJOY!