Bosch Router Table Featherboard Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bosch Router Table Featherboard Spacer
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 85
- Makes
- 1
- Views
- 382
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is an OpenSCAD file to create BOSCH (RA1171) router table featherboard spacers. I assume it will work with similar models. I bought a second hand unit and it was missing several of these, so I reverse engineered one.
By default, the produced spacer will require supports to print. By unchecking "with_supports", it will produce half of the model along with some guides for glue up. When printing with my Prusa MK4, the supports were removed fairly easily with a needle nose pliers. Glueing up the two parts also worked, but removing the support was much easier. The cover photos shows a spacer printed with supports and a spacer printed without support and glued together with super glue.
I also included a JPEG of the original sketch I made in Fusion 360 before converting this item to an OpenSCAD model.
If you find this item useful, please consider making a donation of any amount the Phelan McDermid Syndrome Foundation (PMSF) under AudienceOfOne:
Thanks, AudienceOfOne