1 / 4
Esp32 Controller / rotary encoder + 4 buttons + 3 leds
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
rotary encoder round display controller box for esp32
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 53
- Makes
- 0
- Views
- 772
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Parts list:
Esp 32 wroom 32 d dev board
240*240 GC9A01 1.28inch display with bottom soldered pins
rotary encoder round shaft
wires
m3 screws 6/8/12mm , nuts for screen holding pegs
4mm diameter 4mm length brass inserts
buttons with 4mm long button part
bend display pins backward
do not screw in encoder assembly before you fit controller ring into it otherwise the inner gear will not let you assemble (fit controller ring at an angle from the bottom where display pins are)
software WIP