Clip-in Net Pots
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.61 – €1.97 net (excluding VAT)
For file: Clip-in Net Cup Mini_0.4n_0.2mm_PETG_XLIS_1h39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.79 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I have designed different Clip-in Net pots, which can be opened to easily transfer and harvest plants :)
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 207
- Makes
- 1
- Views
- 1,005
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I often encountered the problem that I had to cut open my net pots when I wanted to transfer or harvest plants (see picture below) in my hydroponic system. Therefore I have designed a few net pots that can be opened and closed in order to reduce damage to plants while transferring and reducing waste while harvesting. By printing these pots you can contribute to sustainability!
Update (13.5.2025): I have added 3'' and mini versions!
Print Settings
- Material: PLA or PETG or ASA (see below)
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Infill: 15%
- Supports/Brims: Yes/No
ASA and PETG are recommended to print this model because of potential sun and heat exposure (e.g. in greenhouses). For indoor systems, PLA should be sufficient.
The net pots were designed to fit 48mm neoprene rings. However, you can also use other hydroponic substrates like for example Expanded Clay, Rockwool cubes, Coco Coir, and Lava Stones.
Additions parts:
- 48mm Neoprene Rings or 70mm Neoprene Rings
- iDOO Grow Sponges
- Expanded Clay
- Rockwool cubes
- Coco Coir
- Lava Stones
I have used my reliable Neptune 4 and I can recommend the following filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!