Dragonburner Umbilical Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixes the "Umbilical PCB" to the "Voron V0.2 X-carriage" and the Back of the "Dragonburner Toolhead/Orbiter 2 Extruder".
- Rating
- 1 / 5
- Likes
- 24
- Downloads
- 66
- Makes
- 0
- Views
- 1,120
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
A flat backplate to secure the Umbilical PCB to the mounting points on the X carriage and the screws of the stepper of an Orbiter 2 extruder on a Dragonburner Toolhead.
The cables can be guided through the hole in the brace to hinder them from sticking too far out the sides of the carriage.
The standoffs are adapted from the original Voron design but shortened in length to match the spacing to the stepper of the Orbiter 2. They require 2 times 2 heat set inserts.
The original crews of the stepper are fine but rather short. M3x20mm may be used to get more engagement in the inserts.