Drawer handle - quick print - no supports needed
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.69 – €0.85 net (excluding VAT)
For file: drawer handle_STRUCTURAL_0.4n_0.2mm_PLA_MK3.5_40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.77 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 39.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple drawer handle vor your kitchen / living room or even workshop
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice and modern looking drawer handle. Due to the simple design it fits for all kind of furniture.
Dimensions: 15cm x 2,3 cm x 1,5 cm
The holes are 3 mm in diameter. For that reason please use e.g. wood screws with at least 4 mm.
You need no supports for printing. Please use the STRUCTURAL profile. The SPEED profile did not work - at least - for me.
If you like my model(s) please leave me a like to support my work. Thank you!