Winter Lamp with Design by Gaby Katten
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.95 – €2.38 net (excluding VAT)
For file: LR2187C-2-4 Print_0.2mm_PETG_MK3S_2h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.17 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 2.26 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A winter lamp with a pattern design by Gaby Katten.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 103
- Makes
- 3
- Views
- 1,016
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Decorate your room with a lamp featuring a beautiful pattern design by Gaby Katten. The print requires no glue and because of the multipart design, you can print it in endless colour combinations.
See more of Gaby's work on www.gabykatten.net.
How to Print the Parts
I recommend PETG to print this lamp. I did not test it with any other materials, PLA may be too brittle for the clamps - and also may not be heat resistant enough.
Use the two prepared Prusa Slicer configuration files for the best results!
| Layer height: | 0.2mm |
| Material: | PETG |
| Perimeter: | For the frame parts: 3 For the panels: 2 or 3 |
| Printer bed: | Satin (or rough) |
| Filament: | Prusament PETG Galaxy Black Prusament PETG Neon Green Transparent Prusament PETG Carmine Red Transparent |
Start printing all the frame parts:
- 6x LR2187C-2
- 1x LR2187C-3
- 1x LR2187C-4
These are all one colour prints. I used Prusament Galaxy Black for the shown photo. After these, print the sides:
- 6x LR2187C-1
This is a multicolour print, for the shown example print, I used these colours:
- Layer 1+2: Prusament PETG Neon Green Transparent
- Layer 3+4: Prusament PETG Carmine Red Transparent
- Layer 5+: Prusament Galaxy Black
The prepared project and gcode file use two colour changes for the print, but the model supports up to three different colours.
- Layer 1+2: Colour 1 (lightest colour)
- Layer 3: Colour 2
- Layer 4: Colour 3
- Layer 5+…: Opaque Color
Assembly
- Start with the lamp bottom (LR2187C-3) and place it in front of you on a flat surface.
- Slide the first side into the groove (LR2187C-1). Make sure it is perfectly centred.
- If the side panel does not slide in the groove, use a fine sandpaper and remove material from the backside of the part until it has a tight fit.
- Next, continue with the second side.
- Use one of the clamps (LR2187C-2) and carefully slide it over both hooks of the panels.
- Repeat this, until all panels and clamps are in place.
- Now, add the top frame (LR2187C-4)
- Start at one corner and slide all panels into the groove of the frame.
- In the end, you can use a flat piece of wood and a hammer to carefully press everything into its final position.
More Designs
If you like this lamp, check out these two designs of this lamp:
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
If you like this design, please rate it and add a photo of your print. 😄
Happy printing!