The Owl House Ground Floor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of the ground floor of the Owl House from the show of the same name.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 146
- Makes
- 0
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution
This is a model of the interior and exterior of the Owl House from The Owl House.
It has four rooms - the living room, kitchen, shack and a corridor.
This model combines with the two other floors for the complete Owl House.
Dimensions | Length | Width | Height |
|---|---|---|---|
entire house | 179mm | 176mm | 166mm |
179mm | 172mm | 75mm | |
107mm | 154mm | 48mm | |
103mm | 91mm | 80mm | |
103mm | 107mm | 282mm |
You can either print the rooms seperately (folder “Separate Rooms”), or print them all combined with the exterior (folder “Combined”).
Print time and weights are for the combined rooms.
With the separate rooms, the walls are printed lying flat on the print bed and have hinges to fold up.
With the combined rooms, the walls are printed seperately from the floor (which also includes some of the furniture).
The seperate rooms are closer to how they appear in the show. For the combined rooms, I had to make several adjustments to make everything fit and line up.
Print Instructions
Everything except for “toh_house-ground floor walls” was printed at 0.15mm layer height without supports.
“toh_house-ground floor walls” was printed at 0.2mm layer height and requires supports.
UPDATE [2026-03-22] Fixed the floating log pile in the kitchen
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#