Counting matching models…
This easy-to-print broom holder uses a rolling gear and the broom's own weight to securely clamp it in place. Just lift the handle slightly as you push it in place to lift the gear, and then let it settle back down to lock in place. To…
Uses a snap-fit system to hold the handle firmly without the need for assembly. Versions -> Updated version with more grip: The model is available in multiple sizes to fit different handle diameters: Ø25 mm Ø30 mm Ø35 mm Function The snap…
DEMON SLAYER FANDOM: Add some Demon Slayer flair Category: 2D Art
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
My core teacher needed new bathroom passes, so I made them. I printed in PLA and PETG on .20mm. Should be easy to print!
use low infill if possible on this, the broom end can get heavy for the default stand. print with supports.
Εργασία μαθήματος «Καταγραφή και Τεκμηρίωση Μνημείων με Προηγμένα Συστήματα» με διδάσκων: Αλέξανδρος Κοίλιας
I have not tested with the rubber sweeper. I printed with 2 walls and 15% infill. I used 3 X 1.5" deck screws to attach to my mounting board. If flush mounting to the wall a spacer may be required to increase the standoff otherwise the…
A simple replacement for a broken broom handle cap for sticks with a diameter of 21.5 mm. It is printed with Fiberlogy Fiberflex 40D, which is a bit tricky. No support was used, but an outerbrim of 3 mm to make sure that the object is…
This a recreation of a hospital room intended to be utilized as a playset for children to learn about and normalize their hospital experience. It includes the base of the room and common furniture found in hospital rooms as well as…
Edge Sweeping Brush Holder Multi Surface Brush Holder Dry (Vacuum Only) Filter Holder Wet (Vacuum & Mop) Filter Holder
Bathroom Hook Enhance your bathroom organization with this sleek and functional 3D-printed bathroom hook. Designed to hold towels, robes, or accessories, it combines practicality with modern aesthetics. Design Features: • Minimalist…
3D-Scan of a Mushroom head Print settings: Layer height: 0.1mm Layer thickness: 0.4mm (better 0.2mm) Support: Yes I would be delighted if you would choose my file and share photos of it. Many thanks and have fun.
Mushroom Leg Noozle 0.4mm Layer height - 0.2 Seam position - randomly Infil - 10% (Gyroid) Supports - 20° (organic) Printed upside down !!! + I use fuzzy skin only on the outside surface, except for the thread, which must remain smooth.…
Replacement for your old water drain cover with high flow rate. Diameter 80 mm Height 80mm Air blocker half cylinder depth 40mm
Model of non-rotating Stargate simplified for this scale and separated chevrons. Stargate - Diameter 203 mm It contains two parts which I recommend glue together with superglue. You can also use three dowels for better aligning (adjust…
This holder is intended for use in 600 series Roombas to convert them from using Ni-MH to Li-ion. This holder is intended to hold 10 18650s in a 5s 2p configuration. Fully charged this pack is at the upper limit of the Roombas voltage…
Print long edge on bed and I recommend to using brim. 4 perimeters 0.15-0.2mm layer height No need for supports PLA, PET & ABS works well. You'll need to adjust the clip to your liking.
Hi this is my first time making anything at all. I made this name plate for my son's bedroom door and will attach with Dubble sided tape any feedback is welcome. infill density 15% infill pattern “GRID” Extruder nozzle 0.04mm i had to…
Carvana has a really unique concept to purchase a car. They have tall towers that they call car vending machines to store and display all of their cars. The Carvana towers are easily recognizable and look so cool seeing the cars displayed…
This model provides a quick and convenient way to hang towels, washcloths, or clothing on your bathroom radiator. Its smooth, curved shape clips securely onto a horizontal radiator bar without scratching or damaging the surface. Clips are…
Adapter for the Dreame D10+ auto empty station to accept Roomba bags
One place each for OneBlade and Multigroom series shaver Added a couple of places for most used accessories like nose and body trimmer Long tray for all other accessories Toothbrush and toothpaste tray Trays are a little bigger than…
After the students have received instructions, the students go to work independently. The tool is to announce if the students are available for questions/help from other students. The question mark is if the student has a question for the…
A giant mushroom bundle for DnD and other TTRPGs, perfect for Underdark and Fey Wild adventures! There is both a medium and large version, based on a 25mm/1 inch grid. It is a fun piece to print with glow in the dark fillament aswell! It…
No support Nozzle: 0.4 Layer: 0.2 Infill: 15% Like the original
A set of mushrooms with a knife to bring a cool vibe to your kitchen
Bathroom pass for boys and girls. It has a preset hole so you can add a string or rope to the end of it. Feedback is always appreciated
design to hold an ESP32-C6-WROOM (such as https://www.amazon.com/dp/B0C61JTNJ6 ) I couldn't find a box i liked and made this one. it also comes with a backing plate with retaining studs to mount it on the wall with 3M command strips (or…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
This handy stand ensures the Philips Bodygroom and its accessories are always within easy reach and ready for use. Its made for a Bodygroom Series 5000 and can store the Bodygroom itself, 4 comb attachments, the back shaving attachment,…
This insert fits inside a mushroom light for an RV. The idea is to reduce the amount of light being transmitted as those light can be rather harsh. I recommend using PETG, and to use a .15mm layer height. This will give you 3 layers of…
Optimized for FDM 3D printing with no supports needed! After many, many iterations (like 5-6 for each clip type), I managed to create minimalistic clips that can hold all of the blade guards in this Multigroom 7000 kit, and likely other…
Allows you to easily switch guards with one hand, when your other hand is not free. Designed for Philips Multigroom guards. There's a slight learning curve, but it's easy after you do it a couple times. To detach a guard, slide it down…
i Made my wife a neon sign for his nails bussines, the neon light that this model support it is the 5mm neon flex strips. i cut the model in four parts so it could be printed in a 220 x 220 bed. i left some holes so you could put the…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
You can print in one go (for single color printers or hand painters) or you can print in parts (for multicolored prints.) Tested and printed on flashforge AD5X multicolor printer, and assembled after print.
I couldn’t find any free model that fit perfectly, so I made this one. Prefer “ .step ” over " .stl " for higher resolution. Very easy to print.
Broom Handle Holder V2 The new broom handle holder comes with significant improvements over the previous version. The design has been optimized to be more compact , while maintaining excellent strength and practicality. On the sides,…
Dorm Room Bedpost Shelf This dorm room bed post shelf is designed to fit 2 ¼" or 58mm Square bead post. should be able to be scaled to fit other sizes. It is 210 MM Square surface can hole a fair amount of weight. Ideal for their phone or…
Take your robot vacuum to a galaxy far, far away 🚀✨ This model is a stylized Millennium Falcon cover designed to sit on top of your Roomba (or similar round robot vacuum). It adds a playful sci-fi look while keeping the vacuum fully…
This brush is designed for the Roomba i3 ～ i8 and is made using the Bowden-style Teflon tube that many of you probably already have. About 10–15 printed bristles are bent, threaded through the each tubes, and hooked onto the pin inside…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This cute mushroom dragon model blends fantasy and nature…
Bring a touch of the forest into your space with this nature-inspired mushroom shelf. Designed to resemble layers of wild shelf fungi growing from a tree, this sculptural wall piece is both beautiful and practical. It’s perfect for…
My broom didn't came with a clip so I made one. The clip fits on handle with diameter 21-22mm. I printed in PLA, but I suspect it'll deform over time. Easy fix with a hairdryer. Use tight fit model for better grip. I used 0.26mm layer…
This is an upgrade….. this broom has a bigger pin. the other type was far too flimsy…! here is a pretty witch on a broom. I wanted her big enough to see some detail but then the broom was too big to fit on the build plate. the pix show my…
Enjoy the file. works great for bathroom supplies, just drains right into the sink.
Most of the designs on here are for 32mm posts. These are designed for 30mm ones. If you don't know your size, use some digital calipers to find out. Printed at 0.2mm layer height in PLA at 20% infill. They work with no issues. The…
I liked the Broom Holder - Portascope from @Emanuele and I wanted to mount 4 brooms on the wall. But since we use bricks and mortar in my country for buildings instead of drywall, I felt it a bit too much to drill 8 holes in my wall. So I…
pedale pour poubelle de salle de bains Print Settings Rafts: No Supports: Yes Filament Material: TPU Notes: TPU95 Category: Bathroom
A functional and aesthetic hook designed for hanging towels, bathrobes, or clothes on a bathroom radiator . It features a fun accent inspired by LEGO bricks. • Compatibility: The hook is designed for mounting on radiator pipes with a…
small support 45x45mm to hold a zigbee switch inside the bathroom fan.
I created this cover for the bathroom vent which is rectangle shape in order to install a fan. The inside dimensions are 205x105mm.
🦋 Mushroom Butterfly Cottage 🍄 Step into a storybook world with this enchanting 3D printable cottage, perched beneath a whimsical mushroom roof and crowned with a delicate butterfly. Few supports are needed. I used organic-style supports,…
Mushroomman Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
A simple clamping mount/hook to store a broom or mop hanging from a door. Can be printed without supports in PLA or PETG. My version is printed using 0.2 layer height and 0.4mm nozzle
A connector for 3 broomsticks in a perpendicular placement. Print 2 identical units and connect with a 35mm long M5 bolt with wide washers on both sides. The connector can be mirrored if you desire a left handed axis placement.
This is the GridQuest Throne Room Set which contains: This set contains everything to create a giant magestic throne room. It is enormous 144 fields large without any seams and has plenty of room for epic battles and lots of decoration.…
Best printed in ASA or PETG. If the fit is not tight enough the .SCAD file can be modified.
Summary Continued This model is designed for school classroom desk groups, and it can fit: Four test dividers Four TI-30X calculators Four rectangular erasers Four metal or plastic 12-inch rulers Ten wooden pencils Two scissors in varying…
🚻 Funny Toilet Sign – A Peek into Bathroom Humor! Add a cheeky touch to your restroom decor with this humorous toilet sign! Featuring a bold design with two stylized figures—one peeking over the divider and the other standing upright—this…
ESP32-S3 Wroom Cam Box and ball joint M3*6 crew to add the ball joint to the case. no suport needed to print 15% infill. Only the JiontEx will need support Fusion 360 link to the project https://a360.co/3Np1eX2 Ball Joint…
Overview Ultimate Egg Drop Capsule Cub Scouts, Classroom or STEM Projects This project started as a Cub Scouts egg drop challenge for my grandson and turned into one of those builds that was just too fun not to share. A 3D-printed,…
Updated Feb 2 2026 I finally got around to putting it all together, so I uploaded the “finished product” pictures. Updated Jan 24 2026 It's a little larger than the previous model. I'd mistaken a measurement and had to redo part. I've…
Holder for ESP32-WROOM-32 (USB-C) Box. Can be attached to the surface with glue or double-sided tape.
I recommend printing with a wall count of 4 to 6, in PETG or a stronger filament such as ABS/ASA.
This 3D-printable framed object captures a frozen slice of mechanical space, like a relic cut from a larger forgotten room. A solid outer frame holds a recessed interior wall etched with softened gear forms and flowing grooves that hint…
This is my first project here. For those who are tired of struggling with adjustable easel, I've created this project for better repeatability, ease and timesaving while printing little postcards in the darkroom. This easel is designed to…
My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…
Hello Kitty Wedding Cake Topper | Groom Carry's Bride
My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PATCHES BOX / FIRST AID…
Bathroom organizer designed to fit toothbrushes and cosmetics. I have also drilled some holes to places where toothbrushed are stored to let go of water. Printed from PLA
A modern, full-size waste bin designed to maximize your printer's build volume. Features an elegant geometric diamond cutout pattern and elevated base design. FEATURES: - Full room-size trash can (220x220x250mm build volume) - No supports…
Case for traveling with your Space Mushroom (SM). Also includes new base with extra grips. I do not think it fits any other version of the Space Mushroom other than Kempy's version, but I'm including the Freecad source, so if you want to…
I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great. https://www.aliexpress.us/item/3256807345926314.html I bought 4x of the 8x10x7 sleeves, and changed the diameter of the printed top…
This is our HEXagonal MuSHROOM interpretation of the well known dice game SCHOCKEN (german title). This game is played in many European bars and on partys of corse. It is called SCHOCKEN and all you need is this SCHOCKBESTECK, 3 dice and…
This bathroom radiator hook is a simple and practical 3D-printable accessory designed to hang towels, clothes, or bathrobes directly on a bathroom radiator. It installs without screws, glue, or drilling – just hook it onto the radiator…
Bathroom Fittings - Soap Holders, Showergel Holders, Hangers
My wife came up with this decorative sign for our bedroom. It's a simple arch sign using two contrasting PLA colors. I used Duramic PLA+ white and wood colors for this with a 0.15 mm layer height and 15% infill. Printed on a Prusa Core…
A simple bathroom organiser, to help me, organise my shavers ant their accessories. Dimensions (WxLxH): 96x170x50 mm Settings: Supports: No Resolution: 0.2mm Infill: 15% PLA, PETG Filament brand: any Filament color: any
I have an older Subzero brand extendable snow broom that finally broke during a spell of bad weather. So I made a new part for it. Maybe it's useful for someone else as well. May fit other brands or have other use cases. I printed it in…
A playful mushroom character with a rounded cap and simple facial details. Designed to look like a real 3D printed object, complete with visible layer lines and natural printed texture. Powered by MakerWorld-Image-to-3D (…
100x160mm signs, , featuring art of a running person, the words "Rest Room", and arrows pointing right, left, or up Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…
