Grease Gun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resin printed Grease Gun
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 0
- Views
- 741
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
(Updated) Do not use this with anything that has alcohol. it will soften the Resin over time.
Modeled after the real metal grease guns from Taiwan. This is dimensionally accurate to the real thing only difference is the threads do not fit and not intended to swap parts with the metal version.
Required BOM:
3x 3Mx6mm worm screws
1x 3Mx16mm https://www.amazon.ca/dp/B01B1OD62C
1x 0.5x6x10mm Spring https://www.amazon.ca/dp/B0BBQL2SN3
1x 12x1x35 Spring https://www.amazon.ca/dp/B0C3389NK
(optional) 6mm stainless steel bearing if check valve doesn't work.
Resins used:
ELEGOO ABS-Like Resin 3.0 https://www.amazon.ca/dp/B0CYGVTB83
ANYCUBIC High Clear 3D Printer Resin https://www.amazon.ca/gp/product/B0C9TBZQKK
Curing instructions:
Make sure to cure the prints longer than normal. Resin swells when soaked in Isopropyl or Water when its not fully cured. It is mandatory to use Curing UV LED's in the interior of the models. (Recommended curing time 2 hours) Make sure print calibration is accurate.
Optional tools used for curing:
12 Volt 3mm UV LED https://www.amazon.ca/gp/product/B07TGSRXZ5
DC Power Jack Plug Connectors https://www.amazon.ca/gp/product/B01J1WZENK
DC Power Splitter https://www.amazon.ca/dp/B09M81GVR3
12V 10A 120W DC Power Supply https://www.amazon.ca/gp/product/B07PWZQ33N
Assembly Instructions:
Springs makes it hard to affix the plunger. Use zip-ties to compress the springs. The plunger and the plunger stem are keyed to prevent unthreading during use.
Post Processing:
Make sure to polish the interior of the tube. smoother the surface the better.
Note: Some Clear Coat sprays dissolve with alcohol (Rustoleum Clear 2X)
Printer Used: Phrozen Sonic Mini 8k
PS: I use this for my hand sanitizer project.