1 / 4
Uchwyt Monitor VitaGuard oraz kabel czujnika/Monitor VitaGuard mount and sensor cable. — image 1
1 / 4

Uchwyt Monitor VitaGuard oraz kabel czujnika/Monitor VitaGuard mount and sensor cable.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.25 – €0.31 net (excluding VAT)

For file: Uchwyt kabel czujnika v5_0.4n_0.2mm_PLA_MK4IS_18m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.28 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
18 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Uchwyt do powieszenia monitora oraz kabla do czujnika. A bracket for hanging the monitor and the cable for the sensor.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Uchwyt należy wydrukować lewy i prawy  ( wykorzystaj funkcje odbicia lustrzanego). Uchwyt przystosowany jest do półki IKEA PLATSA. Nałożyłem trochę ciepłego kleju i nałożyć na półkę.

Do poprowadzenia kabla do czujnika wykorzystaj uchwyty. Z uwagi na małą przyczepność zastosuj brim.

 

The handle should be printed left and right ( use the mirroring function). The holder is adapted for the IKEA PLATSA shelf. I applied some warm glue and put it on the shelf.

Use brackets to run the cable to the sensor. Due to the low adhesion, use brim.

Tags