MacBook Pro Vertical Stand with iVanky FusionDock 1+ Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MacBook Pro Vertical Stand with iVanky FusionDock 1+ Stand
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a laptop stand that holds my iVanky dock and my MBP 14" laptop with a case nearly vertical for clam-shell mode, but accessible when I have to actually open/touch it since the dock doesn't have a power button.
Stable enough to open to the max size that a MBP will open, but the angle would be wrong using as another screen next to externals.
Finished print dimensions:
Horizontal Dock
- 204 mm wide
- 156.75 mm deep
- 73.5 mm high
Vertical Dock
- 204 mm wide
- 168.75 mm deep
- 60.82 mm high
Included STLs for having the iVanky dock both vertical and horizontal.
Due to wanting the HDMI and network port facing the back, for the horizontal dock, I built this so the dock will be installed upside down due to its cable length to connect to the laptop ports.
Printed in 2.5 hours on my Bambu X1C with 3 walls, using a 0.6mm nozzle and 0.3mm layer height
No screws or any other hardward needed. I had neoprene strips laying around, so I put down where the dock and laptop make contact.