1 / 8
Diatone 2019 R349, R249 & R239 - TBS Crossfire Antenna Mount — image 1
1 / 8

Diatone 2019 R349, R249 & R239 - TBS Crossfire Antenna Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed to mount my TBS Crossfire Antenna to my new Diatone 2019 R349, so I came up with this design.

Rating
0 / 5
Likes
5
Downloads
25
Makes
0
Views
750
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Needed to mount my TBS Crossfire Antenna to my new Diatone 2019 R349, so I came up with this design. It should work on the R249 and possibly the R239. I printed everything in TPU. I also used the default FLEX setting on my Prusa MK3, but i turned on smart cooling since the tiny parts would turn to ooze near the end of the print (Still a noob at TPU).

So I designed this mount not to use supports as best I could, since TPU supports are a pain to remove. So for the mount there is two pieces that you will have to join together. I just used a hot soldering iron on all the seems, which worked really good.

I also made some arm mounts that work ok, but honestly a zip ties works pretty good with less weight, however these arm mounts do keep the antenna straighter.

Note: There are two different versions of the upper mount, one with support and the other without, unfortunately the supports I created helped but not that much.

Link to the VTX Antenna Mount that I also created: https://www.thingiverse.com/thing:3317546

Link to a leveling stand to calibrate your Accelerometer if you need it: https://www.thingiverse.com/thing:3319293

Print instructions

Category: R/C Vehicles Print Settings

Printer Brand: Prusa

Printer: i3 MK3 MMU 2

Rafts: No

Supports: No

Resolution: .15

Infill: 20%

Filament: Sainsmart TPU Black

Tags