P
PrintablesSethOne
Diatone Roma F5 - GOKU GM10 NANO V3 GPS holder
TPU 92A - 98A Při vkládaní GPS doporučuji print trochu ohřát horkovzduchem.
- Downloads
- 198
- Likes
- 5
- Rating
- 0
Search results: diatone
Counting matching models…
P
PrintablesNate42
Diatone Roma L3 DJI O3/O4 Air Unit TPU Mounts
** Upon request I have updated my model to support the DJI O4 Air Unit Pro and created a separate file with just the camera mount and a modified rear antenna mount. I have not tested this mount on the frame but the O4 Camera/ND Protector…
- Downloads
- 136
- Likes
- 6
- Rating
- 0
P
Printablesjosepilar
Diatone ROMA F5 arms protection (steel ball cut)
Got some skidders from a subscription bag and thought it was a cool idea, I still wanted to have the my regular arm protections for my diatone roma f5 v2 but with these steel balls (1/4 inch) insertions so I remixed a this good design…
- Downloads
- 106
- Likes
- 6
- Rating
- 5
P
PrintablesSTRIKING FPV
M8Q-5883 GPS and Immortal Antenna Holder for Diatone Roma F5/F6
The Diatone Roma F5 DJI V2 frame kit comes with an included GPS and Immortal Antenna holder which is very nice quality and does a great job, provided you have the correct GPS (I think a BN220 fits it, can't remember exactly), but if for…
- Downloads
- 98
- Likes
- 8
- Rating
- 0
P
PrintablesFrodo
Diatone roma F4 arm and motor protector
Printing the part out of a hard tpu is recommended, no supports needed.
- Downloads
- 92
- Likes
- 4
- Rating
- 0
P
PrintablesNat L
Diatone Roma L3 soft mount for DJI O3 air unit
Diatone Roma L3 has vibration issue due to no dampening at the camera mount. So I made this file for TPU 3d printing. You may need addition nuts because TPU could not hold bolts in place. Thank you “WR FPV” for the advice
- Downloads
- 90
- Likes
- 6
- Rating
- 0
P
PrintablesFrodo
Diatone Roma F4 Gopro mount
Designed to be printed In tpu like most other parts for fpv drones. I recommend that you print the mount with solid infill and at a high temperature to maximize layer adhesion. Update: Normal version is best used with lighter cameras.…
- Downloads
- 84
- Likes
- 2
- Rating
- 1
P
PrintablesTim O'Brien
Diatone Roma L5 Landing Feet Skids / Arm Protection (etc!)
Don't land on your motor bolts! For some reason the Roma L5, as great as it is, doesn't come with any bottom landing solution other than erasing your motor bolts . I designed form-fitting bolt-on landing feet that are also arm protection.…
- Downloads
- 83
- Likes
- 10
- Rating
- 0
P
PrintablesTim O'Brien
Diatone Ripper R690 Servo Cover & Protectors (aka HEE Wing F-01)
Part 2 in my make-the-Ripper-epic series: Fitted servo covers! The Ripper, also known/sold sold as the HEE Wing F-01. Want to give your servos better protection in your bag, potentially lower drag, and better crash-resilience? Print…
- Downloads
- 83
- Likes
- 11
- Rating
- 0
P
Printablesjosepilar
Diatone Roma F5 V2 O3 antenna mount
Antena mount for diatone roma f5 v2, might fit other diatone frames. Print with antenna tube poiting up, or you can use the prusa slicer “place on face” function and select the opposite cut.
- Downloads
- 73
- Likes
- 3
- Rating
- 0
P
Printablesyurlinsky
Diatone Taycan GoPro Mount
Mounts for gopro on drone Diaton Taycan
- Downloads
- 71
- Likes
- 3
- Rating
- 0
P
PrintablesSand
Diatone Roma L3 VTX - RX Antenna Mount
Diatone ROMA L3 and L4 - VTX and RX antenna mount
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
PrintablesQel tlhaw DIyuS
diatone roma f35 Walksnail dual antenna + gps mount
Mount for 2 antennas and gps (15x15x5.5mm) for diatone roma f35 frame.
- Downloads
- 64
- Likes
- 2
- Rating
- 0
P
PrintablesVincent12FPV
Diatone ROMA L3 and L4 - GPS, VTX and RX antenna mount
Diatone ROMA L3 and L4 - GPS, VTX and RX antenna mount It is my version 6 and 7 of the design. I think it is now great. I added some small mount to secure the Immortal T antenna. They stop the antenna going into the props when crashing…
- Downloads
- 63
- Likes
- 6
- Rating
- 0
P
PrintablesDionarap
Diatone Ripper / HEE Wing F-01 Wallmount
to save space i wnatet to hang my Heewing F-01 to the wall. But i could not find a wallmount here, so i designed one myself. Easy to mount with 2 screws and holds the wing securely. Print Settings Printer Brand: Prusa Printer: i3 MK2S…
- Downloads
- 62
- Likes
- 4
- Rating
- 0
P
PrintablesMcFly
Diatone Roma L4 O3 Kit M10 Gps Naked Gopro
i build some parts for my 3.5 build using roma l4 frame. added some 23mm standoffs to mount the o3 cam. happymodel elrs diversity and cap mount included. mount for flywoo nano m10 gps. and iflight naked gopro Category: 3D Printing
- Downloads
- 58
- Likes
- 6
- Rating
- 0
P
PrintablesRaptor_50_Titan
Diatone ROMA F5 12AWG Wire Fixer - Battery Lead Retainer - JH60106
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
- Downloads
- 57
- Likes
- 1
- Rating
- 0
P
PrintablesTim O'Brien
Top Hatch/Canopy Replacement for Diatone Ripper R690 / HEE Wing F-01
Lost your Ripper canopy? Went over 100mph and it flew off, never to be found? Did an unexpected water landing but never recovered the hatch? Oh, not me. Totally not me. PRINT A NEW ONE Prints in ~5h. I used lightweight-pla (aka LW-PLA)…
- Downloads
- 56
- Likes
- 8
- Rating
- 5
P
PrintablesTim O'Brien
Removable Wings for Diatone Ripper R690 / HEE Wing F-01
The Diatone Ripper is a sweet plane.. but it'd be even sweeter if it had easily removable wings. Print these and you're ready to rip* then pack it into a bag! * Also the Ripper is sold sold as the HEE Wing F-01.. same plane but white…
- Downloads
- 52
- Likes
- 9
- Rating
- 5
P
Printablesnerdpersonthing
Plane Wall Mount for Heewing F01 (F-01) / Diatone Ripper
Designed to nestle into the crooks at the far left and right sides of the wings. Uses two Small-size command strips for wall mounting, one for each side. Prints in the provided orientation (flat wall-mount side facing down). Minimal…
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
PrintablesRaptor_50_Titan
Diatone Roma F5 Side Panels
This is the Front airflow side panel for the Diatone Roma F5. This may fit various variants of the Roma series. any issues or suggestions please let me know.
- Downloads
- 49
- Likes
- 4
- Rating
- 0
P
PrintablesEl Flecko
Diatone Ripper / HEE Wing F-01 Caddx Vista Drop-In with Camera Mount
Mount for the Caddx Vista or Runcam Link in the front of a Diatone Ripper / HEE Wing F-01. Single Mount for the Vista an the Camera. It's designed as a Drop in, so you can switch it to different Models. Fit's in my ZOHD Dart 250g to. Two…
- Downloads
- 49
- Likes
- 5
- Rating
- 0
P
PrintablesDwall
Diatone Taycan GPS mount
Diatone Taycan GPS mount with spot for VTx antenna
- Downloads
- 47
- Likes
- 1
- Rating
- 0
P
PrintablesAnton
Diatone Roma F4 M8Q GPS and DJI Vista Antenna mount
Diatone Roma F4 GPS mount antenna mount... Category: R/C Vehicles
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
Printablesjosepilar
illinSnap v2 GoPro 10 diatone roma f5 v2
remix from the original that includes a mount for the Diatone roma F5 v2 Category: R/C Vehicles
- Downloads
- 43
- Likes
- 1
- Rating
- 0
P
PrintablesMcFly
Diatone Roma LR4 F4 L5 M8Q Iflight GPS Mount Vifly Mini Finder Buzzer Mount
iflight GPS and Finder Mount ( Backpack-Sandwitch) for Diatone L5 Longrange ... may also fit F4 and LR4 but not testet. also TBS M8Q GPS should fit Category: 3D Printing
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesMcFly
iFlight M8Q-5883 GPS & Vista Antenna Mount for Diatone Roma F4 LR L5
compact backpack for m8q gps (iflight or matek) and vista antenna Category: 3D Printing
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesRaptor_50_Titan
Diatone Mamba System Logo / Keychain & 7 Variations
This is some Variations of the Diatone Mamba system logo. This is a Fan art wall mountable logo for your hobby room. Also includes a smaller 80mm/ 3.5 inch Keychain version. Includes seven different versions. Please comment below for any…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesTim O'Brien
Diatone Ripper: THE MISSING PART (aero pan servo nose)
Update Dec 2021: Added a camera-only variation for ultimate aerodynamic speed. Thanks Bambusgott. Edit again: now added a completely blank version too. Any other requests welcome. Part 3 in my make-the-Ripper-epic series: An aerodynamic…
- Downloads
- 34
- Likes
- 7
- Rating
- 0
P
PrintablesAleksander Krawczyk
Diatone Roma F5 dual Foxeer Lolipop 4 mount
Printed from TPU with 100% infill. Holds the antenna pretty well. I'm using the u.fl version of them so the cables are pretty long (that's why the sleeves are so high up)
- Downloads
- 34
- Likes
- 0
- Rating
- 0
P
PrintablesRaptor_50_Titan
Diatone Roma F5 HD Camera Sideplate Moun Carbon Fiber Version
This is a remix of the original Diatone Roma F5 HD camera side plate mount. Remix design is a replica of the carbon fiber version https://cdn.shopify.com/s/files/1/0027/2708/4144/products/DSC07611_600x.jpg?v=1599641610…
- Downloads
- 33
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Veden
Diatone Roma F5 tail mount for BN-280 and SMA
Tail mount for Roma F5 that holds Beitian BN-280 GPS unit, SMA and ELRS antennas.
- Downloads
- 33
- Likes
- 0
- Rating
- 0
P
Printableslolthekidison
Diatone Roma LR3 GPS Mount
Recommended print In TPU. No supports needed, Pre orientated. Short and Long versions. Specific to Flyfish Mini M10 GPS, however should work for other mini GPS brands. About 10-15 Sats locked in 1-2 minutes
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesFattum
Runcam Thumb mount for Diatone GT M515
Крепление Runcam Thumb для Diatone GT M515 (Diatone GT-Marauder515 M515 Normal X Split). Рекомендую не падать с таким креплением, погнете алюминиевую клетку. 16:9 21:9 + Gyroflow
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesNinova66
Diatone 2019 R349, R249 & R239 - TBS Crossfire Antenna Mount
Needed to mount my TBS Crossfire Antenna to my new Diatone 2019 R349, so I came up with this design. It should work on the R249 and possibly the R239. I printed everything in TPU. I also used the default FLEX setting on my Prusa MK3, but…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
PrintablesNinova66
Diatone 2019 R349 & R249 Leveling Stand
Made this real fast to make it simple to calibrate the accelerometer on my new Diatone. Since it has zip ties and now a Crossfire antenna holders it hard to level this thing so i just made something small and simple to do the job. Link to…
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesNinova66
Diatone 2019 R349, R249 & R239 - 45 Degree VTX Antenna Mount (Turtle Mode Friendly)
Created this for my new Diatone 2019 R349, but it should work for the R239 and R249 since it uses the same canopy. I saw a bunch of YouTube reviews and they all complained about the antenna placement so I created this as fix for that…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesNinova66
Diatone 2019 R349, R249 & R239 - 45 Degree VAS Minion Antenna Mount (Turtle Mode Friendly)
Here's a VAS Minion Antenna (UFL) Mount for the 2019 Diatone R349, R249 and R239 canopy. So i created three options for this antenna Mount, because I read that TPU can block or change the 5.8Ghz by the time it gets to your goggles. I read…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesNJVS24
Optimized mount for the CineLog35 V2 frame, designed to securely hold ELRS and VTX antennas along with Diatone LED strips
This mount is designed specifically for Cinewhoop drones, tailored to fit the Cinelog35 V2 frame. It provides a secure and elegant solution for attaching both an analog VTX antenna and an ELRS antenna while maintaining a clean,…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
Printablesbillyd
Runcam 5 (or 3) Mount for Diatone Taycan Cinewoop
This is a partial remix but Thingiverse is not working with remixes currently so I will simply give credit here in the summary. It is partially based off of this model: https://www.thingiverse.com/thing:2334291 I will also message the…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesBrodes_9
Gopro Hero 7 Mount For Diatone 2018 GT R630
Designed for StatementPatient7816 to fit their Hero 7.
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesSenelyzas44
GPS Mount Diatone Roma V2
Made to fit HGLRC M100-5883 M10 GPS ant vtx antenna. It is a snug fit, but I have useded a small piece of double sided 3M tape (Just in case). Print in TPU of Your choice.
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
PrintablesVladimir Sobolev
DIATONE L5 GPS mount for HTZN GPS module
Minimalistic GPS holder to fit DIATONE L5 style and good wire management. GPS module I've used can be found on Ali by se
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesAlex Veden
Mamba TOKA 2306.5 motor protection (Diatone Roma F5 stock motors)
Motor protection for 2306.5 quadcopter motors
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesSondre Hetland
Diatone Roma L4 Mini GPS Mount
Designed for the diatone roma l4 frame, but it might fit other frames. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Dimensions: Distance between attachment…
- Downloads
- 19
- Likes
- 7
- Rating
- 0
P
PrintablesBoopidoo
Diatone Roma LR4 + Flyfish GPS mount
GPS mount for the Flyfish mini M10 GPS. Printed in TPU and 0.25mm layer height. Support is not needed but the bridge can look better if you do. If you like my designs please consider donating a coffee or any amount really, I appreciate…
- Downloads
- 19
- Likes
- 6
- Rating
- 0
P
PrintablesVincent12FPV
Naked GoPro mount for Diatone ROMA L3
This is the file to mount a Naked GoPro onto a Drone FPV Diatone Roma L3. This set-up has the Go-Pro oriented at 28° from the horizontal (that how I fly). This should be printed with TPU. The printing orientation maters ! Happy printing…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printablestiz.io
Diatone MXC Taycan rear GPS mount
A simple rear shelf designed to fit the BrainFPV GPS module. Will also fit the uBlox M8 GPS and most other drone-sized modules. Tip: In addition to VHB tape, use a heat gun to warm up the tabs and then form them against or over the edges…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesVladimir Sobolev
Diatone ROMA L5 Mount V2 for GOPRO BONES
V2 Mount for new GoPro HERO10 BONES. No camera in view. Print on front face down, no supports needed. More stable mount to hold the camera.
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printableslolthekidison
Diatone Roma LR3 Caddx Vista Mount
Recommended print In TPU. No supports needed, Pre orientated. Soft mounts Caddx Vista to Diatone LR3 frame. Creates space for wires to travel under transmitter. Two versions, Usb / Antenna up. Usb / Antenna down.
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesMurphy9904
Diatone Taycan DJI Action 2 Camera Mount
This is a mount for the DJI Action2 to be attached to the Diatone Taycan Cinewhoop Drone. You can choose between angles from 5° to 25°. For my needs, the 15° angle is perfect—I'd recommend trying this one if you are unsure. It needs to be…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printableslolthekidison
Diatone Roma LR3 SMA Antenna Mount
Recommended print In TPU. No supports needed, Pre orientated. Mounts Antenna SMA to frame. MMCX to SMA or UFL to SMA.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesGhostprop
Diatone Roma f5 v2 Arm/motor protect
better protect arms and motors allmost identical original butt little chances... I use Tpu 95A filament
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesNoroNetwork
Diatone Roma F5 Session 5 + TBS ND Filter
Diatone Roma F5 Gopro Session 4,5 mount with Etnix and TBS ND filters Hello, i remixed this mount specialy for diatone roma F5 because i cant find any specific mount that would be robust enought to witstand FPV beating :D Hope that you…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesPeterLandin
Diatone white sheep landing gear adapter
This is a adapter for the Diatone White Sheep frame so that you can use the F450/F550 Landing gear, and mount your gimbal under the frame insted. The adapter is using 4 holes in the DWS frame, see picture. And the landing gear will go in…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesLeif
Diatone F35 Rear antenna holder
This will fit over the rear standoffs for the Diatone F35 Quadcopter and allow mounting of a pair of ELRS linear antennas and a caddx Vista og walksnail Avatar lollipop antenna on the opposite side. I using a walksnail Avatar vtx you may…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesEl Flecko
Diatone Ripper / Hee Wing F-01: THE MISSING PART Remix
Simple Remix of 4961537 Standard-19mm Camera Version, but with Vents for Air flow. Category: R/C Vehicles
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablesps915
Diatone Taycan Insta360 Go 10° Mount
Mount for the new Insta360 Go Print in TPU! Category: R/C Vehicles
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesJerome
Diatone Tina GoPro Lite v2 Mount (BetaFPV)
A 10 degrees mount for GoPro Lite v2 (BetaFPV) which fits the Diatone Tina Whoop frame Remix from : https://www.thingiverse.com/thing:4531376 and https://www.thingiverse.com/thing:4567487 Print Settings Printer Brand: Creality Printer:…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesLenny B FPV
V1 + V2 + V3 Diatone Tyrant 630 / 540 Gopro 3 holder (25 deg)
UPDATED VERSION 2/3 Mount for Diatone Tyrant 630 ,540, and 530 with an angle of 25 deg. V1 its too bouncy/flexible!! / dont waste time and filament V2 is much better. More Gopro contact surface and more stable with almost same weight. V3…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesPrintingW
Caddx Peanut mount for Diatone Roma F4
Printed with 80% infill PLA With Supports 70mm/s
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablessigsegv0x0b
Diatone L4 O4 Pro mount
Parts to put an o4 pro onto diatone L4 frame The camera tilt is 22 degrees The antenna and the pad should be printed from TPU The cage can be printed from a hard filament or TPU. For me I printed the cage from 95a tpu and the pad 85a tpu…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesMupshot
Diatone Roma L4 Mach3 mount
basic Mach3 VTX holder that fits in place of the stock VTX tray. V2 is a rough draft of the same tray with an extension added to mount an SMA pigtail. Its not pretty, but it worksusing two 6mm M2 screws. Future mixes might try to…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesPierre
Diatone X260 Quadcopter leg
The legs with this frame are broken very quickly, i designed and printed simple legs to avoid my ESC being in touch with the ground when langing, soft or hard .... Just use one 3mm screw to attach it through the hole already there. Print…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
Printablesnick.HZN
Diatone Gt-M200 Gopro Session Mount
Mount for a gorpro session for the Diatone frame the GT-M200 (5 inch) normal plus or any other version. Print it in tpu or similar felxable fillament for the camera to fit in. ***11 april 2018 Uploaded version one with 35 degree angle.…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesSponge
Diatone GT - Tyrant 530 540 640 630
GoPro Session 5 Mount For Diatone GT - Tyrant 530 35° Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: TPU TPU Black Category: R/C Vehicles
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesMupshot
diatone Roma F4 LR Li-Ion mount with Runcam Thumb adapter.
work in progress. Modification to the Roma F4 LR frame to secure a Li-Ion battery tray. Battery spacer is to allow two 2cell trays to create a 4s battery pack with replaceable cells. the plate allows for a battery strap to be mounted…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesBoilerBoy
Diatone Mamba F4 LR Accessory Parts
Accessory parts to mount GPS, VTx antenna, buzzer, Rx antenna, and electronics on the Diatone Mamba F4 LR quad. Key design features include a replacement of the internal parts tray to hold, for example, an ELRS receiver and/or RealPit…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesSondre Hetland
Diatone L4 LR dual battery mount/holder
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesDanO83
Diatone GT-M Gopro Session / Runcam 3 mount
25, 30, 35, 40, 45 and 50 degrees uptilt. (total uptilt including the 15 degrees frame uptilt) use 4 m2 screws to mount it to the frame best printed with flexible filament Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesHandsomePotato
diatone 4inch GTB 154 shell
A simple case for the diatone GTB154 4inch drone. Print twice using vase mode/spiralize outer contour. Scale one of the two prints to 102% so it will slide over the other. This design has a little more space for the canopy so it can be…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesTimeless3D
Diatone Mamba Toka 2306.5 Motor Soft Mounts
Very exact soft mounts for the Diatone Mamba Toka 2306.5 motors, may work for other motors with a 16mm BCD, but no guarantees! Print Settings Rafts: No Supports: No Resolution: .15 Infill: 100% Filament: any TPU any Notes: Can be ironed…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesPeterLandin
Diatone White Sheep Gimbalmotormount v2
EDIT: Update to V2.0 soon, I did some mods on it again, it touched the frame so I had to move the arm a bit forward. Now it works very nice. It needs harder antiVballs. This is a modification to zatoraxs gimbal, his gimbal did not fit my…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesMaggot3d
Diatone Taycan v4 RP1 Rx mount
Mount for rp1 receiver for Diatone
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesqczek
Reinforcement for Diatone 37# 250 size copter frame
Hi, Because Diatone "carbon like" products suck, I designed reinforcements which make frame stronger. There is also FPV camera mount included. Category: R/C Vehicles
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesPierre
Motor protection for Quadcopter diatone DIY 250
In order to avoid grass or soil to go into the motor each time i do not land correctly .... i draw this protection fixed using 2 of the 4 motor screws under the arm. May be longer screws may be needed. Print Settings Printer: Hobbyking…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesPierre
Led Support for Diatone DIY FPV250 V2 Mini Quadcopter Frame Kit G10 250mm
I made this supports for 3 kinds of led. A 12 led cluster from HobbyKing, 12V, (ref 12LED-RE / 12LED-BL / 12LED-GR / 12LED-WH) to be positionned at the back or in the front. A 3 led with buzzer for Naze32, 5V, (Ref 090000013-0) to be…
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesAmiHamster
DIATONE GT R-90 UXII antenna mount
DIATONE GT R-90 UXII antenna mount i use petg filament Category: R/C Vehicles
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesvagueDirector
AXII / UXII Antenna Mount for Diatone M2.506
A simple no-glue antenna mount for a circular polarised AXII or UXII antenna. Can be modified to fit anything with a horizontal bar (~3.5mm thick) in the frame. Note I am using an Eachine VTX03 here, so the IPEX connector location is…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesRaptor_50_Titan
Diatone ROMA F5 DJI V2 MotorArm JH60520
Roma F7/F6/F5 V2 Accessories Building Parts This is a work in progress, Will update to a more accurate version when replacement arm arrives. This is for anyone with access to a cnc. Tried this with PLA Meta but arm resident frequency made…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesAndrew
Diatone roma F4 arm and motor protector_V2
This is a version for upping the drone a little.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablessprior
Mobius straight down clean plate for Diatone FPV250 V2 quadcopter frame
I wanted a straight down mount for my quadcopter Mobius camera. This one works well. Instructions I printed this with 95% infill in PLA with support generation turned on and the front part down on the bed. It came out nice and sturdy, but…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablessprior
Mobius clean plate and vibration dampeners for Diatone FPV250 V2 quadcopter frame
I saw J0bro's design, but it didn't fit my frame, so I designed a new one which fit my dimensions. I also didn't feel like ordering the vibration dampeners so I designed those as well and printed them in NinjaFlex which seems to have…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablescrazy.biker_84
10 degree uptilt mount for the RunCam3s rubber suit on Diatone Taycan
Mount for the RunCam 3s rubbersuit ( https://www.thingiverse.com/thing:3216295 ) on the Diatone Taycan cinewhoop frame with 10 degree uptilt Print Settings Printer: Renkforce RF2000 Rafts: No Supports: No Resolution: 0,25mm Infill: 35…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesSenelyzas44
Diatone Roma V2 front acc. holder
I have made this front holder to fit accsesories in front part of the drone. It fits rx, barometer and capacitor. Mounting is simple: 4xM2 screws and nuts. Print in TPU.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Antenna holder for Diatone ET160
Hi, This is antenna holder for Diatone ET160. Incase you use Frsky rx with thin antenna wires. You may need to file one corner of nuts get it deep enough, depends of thickness of nut. Use two 3mm straw inside each other (flatten, bend…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Aomway 200mW holder for Diatone ET160
Hi, this is holder for Aomway 200mW Vtx on Diatone ET160. Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,1 **Infill:** 50% Category: R/C Vehicles
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Little Bee esc cover for Diatone ET160 arm
Hi, here's my first 'Thing'.. :) That's just cover for Little Bee ESC which fits on Diatone ET160 arm. Attached also Sketchup file.. feel free to modify. Category: R/C Vehicles
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Diatone ET160 Mobius mount
Hi, here's Mobius mount for Diatone ET160 frame. Enjoy! Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,1-0,2 **Infill:** 20% Category: R/C Vehicles
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Eachine 700TVL holder for Diatone ET160
Hi, this is Eachine 700TVL camera holder for Diatone ET160 frame. Thanks to Jussi H. for 250 sized design!! Edit: 9/2017, as this camera is not very good quality, you could consider longer stand off's and use Runcam Mini or Micro 2…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesSponge
Diatone GT - Tyrant 530 540 640 630 GPS SMA
Diatone 530 GPS + SMA Mount. Category: R/C Vehicles
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintableskC
Diatone Roma L3 arm protection / landing skid
Hi! Here is my design for landing skid/ arm protection for the Diatone Roma L3 frame. It also acts as screw spacer to avoid screws touching the motor windings in my case. Holes for 9x9mm motor mount. print in TPU, 100% infill 💡 For full…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesFerdous Mursalen
Diatone Roma F5 DJI O3 mount.
This works as the replacement of the camera mount on the ROMA F5.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printableshellobutbye
FDL-3 Flywheel Loose for Diatone Mamba Toka 2207.5
I remixed the flywheel to sit loosely on this motor.
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Diatone roma F5 ELRS antenna support
Just au support for the 2.4ghz antenna. Category: Other