1 / 1
Anycubic Fillament Fillament Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When your spool is not attached to your printer and is above the printer this guide will protect the run-out sensor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Attache it to the M2.5 screw used to attach the Filament Run-Out sensor. This is primarily used for a case where your spool is mounted above the printer on something like https://www.printables.com/model/922929-generic-spool-holder-6mm-attachment and the filament is hanging. When the filament goes in at the ~90º angle it can cause shredding of the filament because of the sharp turn when entering the sensor. by using this it will prevent the rubbing against the metal of the sensor.