LACK V2 universal spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder that uses the bearings and rods of the MMU spool rollers
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal spool holder for the lack V2 enclosure, using the bearings and rods of the MMU spool rollers. Retaining rings keep the rod in place when changing spools. There are two versions: in v1 the nut and bolt head have a 70mm diameter; in v2 they are 80mm. v2 also contains a .step file for the model.
You might need to resize the retaining rings to get a good snug fit, depending on your printer.
Make sure to print the bolt with supports for the bearing recess.
If you do not have the MMU spool roller parts, you can use the no_bearing version of the bolt and, for example, this model https://www.printables.com/model/4592-mmu2-printer-enclosure-spool-rod instead.
Please post a make if you like the model :)