1 / 2
Magnetic Mailbox Flag — image 1
1 / 2

Magnetic Mailbox Flag

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic mailbox flag with embedded magnets

Rating
0 / 5
Likes
1
Downloads
16
Makes
0
Views
142
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I found some other similar models but wanted a triangle shape vs the flag style and also wanted the magnets embedded inside the print seamlessly.

I added a pause at layer 10 when using a 0.4mm nozzle and 0.2mm layer height on a BambuLab P1P. With this pause I added 2 magnets into the holes and continued the print. I didn't use any glue, but did notice the magnet initially slid around a bit when the nozzle first reached it. 

The magnets I used are 3/8" diameter by 1/16" thick (https://www.kjmagnetics.com/proddetail.asp?prod=D61-N52)

Please take a quick look at this youtube video for how to add pauses to your prints if you are unfamiliar.

Tags