Magnetic Mailbox Flag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic mailbox flag with embedded magnets
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I found some other similar models but wanted a triangle shape vs the flag style and also wanted the magnets embedded inside the print seamlessly.
I added a pause at layer 10 when using a 0.4mm nozzle and 0.2mm layer height on a BambuLab P1P. With this pause I added 2 magnets into the holes and continued the print. I didn't use any glue, but did notice the magnet initially slid around a bit when the nozzle first reached it.
The magnets I used are 3/8" diameter by 1/16" thick (https://www.kjmagnetics.com/proddetail.asp?prod=D61-N52)
Please take a quick look at this youtube video for how to add pauses to your prints if you are unfamiliar.
