Silica Box with Filament Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€16.45 – €20.11 net (excluding VAT)
For file: Caixa para silica gel (0.6mm - PLA - 22h - 150g)_0.2mm_PLA_ENDER3PRO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.28 excluding VAT (range midpoint).
- Weight reported by the author
- 153 g
- Print time reported by the author
- 21.91 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a silica gel box with filament holder, you can use it to make your dry box for printing. Box: 17cm x 20cm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
You can print these two boxes to put your silica inside and support your roll of filament.
The volume of silica is exaggerated as I only use one box for printing (one filament at a time).
You will need to dry your silica from time to time.
I printed it on wet PETG, the quality wasn't good (lots of webs), but it can be printed on PLA, ABS or other material.
The gap has enough space to prevent the 1.5mm silica from passing through.
It is recommended to measure the box you are going to use, but I designed it to use a box measuring 17cm wide by 23cm deep.
The filament rolls free in the middle, you can improve by using standard rolls (make a support with bearings that fits into the hole of the filament roll).
For the filament roll, you need a bar or pipe that is loose, I used a standard 30mm pipe in Brazil. You can print it too.