Support for iPhone 12 to film printing on Ender 3 (original bed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Este é um suporte para você acoplar seu iphone 12 ou outro smartphone e filmar sua impressão 3D (Timelapse time!)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
(I made it in PLA and it doesn't melt, deform or blah, make it with whatever material you have!)
I built this device to make timelapses without modifying the printer's firmware.
Brackets are required on the main arm! but the quality doesn't matter much as it will be hidden :)
To use it is simple: just fit your smartphone in the designated space! It has a slight tilt to give more perspective.
NOTE: it has 11mm spacing, must be used with a smartphone case! (or adjust for your smartphone) You will only need to loosen the table springs and place the piece in place, you must also place 5mm shims on the back springs so that the table is not uneven.
You can place your smartphone upright, on its side, with zoom, without zoom, with the wide-angle lens... there are countless possibilities.
The support vibrates a little depending on the printing speed (above 40mm/s). The iPhone compensates for vibration with software. I recommend that the locks on the cell phone holder are made of PETG or ABS to avoid breaking (they are very thin). You can modify the cell phone holder without having to modify the main arm.