1 / 3
SLYNX 2.1 - Linear Rail Mod (Remixed from ZAX's LONX mod)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a linear rail assisted prime to the Slynx 2.1, remixed from ZAX's lonx files.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 74
- Makes
- 1
- Views
- 817
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
9/7/24:
- Reuploaded the correct thicc pump files.
29/6/24:
- Added the top pump for MGN9H rail (I've only tested for C rail, should work the same regardless).
- Added a shroud base that works with the older lynx receiver without the interlocking bits.
- Added alternate top pump assemblies which are slightly thicker. Print this if the default pump is breaking around the front.
Refer to the original mod by ZAX for assembly instructions.
However for the pump use the following metric hardware:
- M4 x 8mm screws
- M4 nuts
- 6 x 7mm ball detent (optional)
I've not tested with lock washers, but you'll most likely need M4 x 10mm instead.