Simple UselessBox Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple basic enclosure for a uselessbox. It uses one single 9G servo and can hold a 9V battery for powering.…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a simple basic enclosure for a uselessbox. It uses one single 9G servo and can hold a 9V battery for powering. There is enough space to place little PCBs or put the wiring for the useless box inside. My box is powered by a Attiny13 which gives the ability to run nine differnent programs to turn off the switch. This gives the box a moody personality :-)
The design is very easy, needs no support to print and only has small overhangs which are easy to print.
Youtube: https://youtu.be/ycmA8jxt45w
Firmware for the Attiny can be found here: https://github.com/ringo2k/uselessboxfirmware
Connect the Servo PB0 and the switch to PB4 and thats it (more in the README).
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7OvPWIVaO2F
Category: 3D Printing